5 Fiat Key Cover Lessons From Professionals

How to Find a Fiat 500 Spare Key

lost fiat 500 key's iconic 500 has become something of an iconic vehicle since its revival in 2007. The company has since kicked off a bigger offensive towards different engines with a mild-hybrid version.

Replacing the battery in the key fob on a fiat 500 new key cost uk 500 is straightforward and affordable. The fiat car key main dealer will supply the key in about 10 days.

Fault Diagnosis

The key fob houses an electronic chip that communicates with your Fiat's immobiliser system to ensure that only authorised cars can start the engine. If the transponder chip within the key fob is damaged, it will not be able to connect to the immobiliser unit which means that your car won't be able to start.

The good part is that it's attainable to fix a damaged key fob, as long as the chip isn't physically damaged. A professional locksmith can assist with this issue, and they'll make use of dealer-standard technology to fix the issue quickly and efficiently.

It's possible to use an OBD scanner to see whether your fob is communicating with the receiver module. This is a fast and simple process that can provide you with a first indication of the problem. If the OBD scanner says there is no communication between the receiver and transmitter modules, it may be required for the fob's transceiver module to be replaced. This is a costly alternative, and is best left to an experienced locksmith.

Dead Coin Battery

The most frequent cause of an unresponsive key fob is a dead coin battery. Fortunately, this is an easy fix that only takes about 15 minutes. First, ensure that the key fob is within the range of your vehicle. Then, try pressing the "Lock" or "Unlock" button to test if it responds.

If the key fob isn't in range, it might not respond at all or only intermittently. This could be an indication of a damaged circuit board. You'll need to consult your owner's guide for instructions on how much is a new fiat 500 key you can reprogram the keyfob for this scenario.

The mechanical latch can be removed from the back of the key fob. (See the image below). Then, gently remove the the battery holder close to the switch. Remove the old coin cell battery. Install a brand new 3-volt #CR2032 battery into the fob with the "+ side" facing the rear cover and the " side" directed towards the rubber buttons.

Water Damage

Although the key fob comes with rubber seals that keep water from the electronic chip, it is not waterproof. A splash of rain or a wash cycle is likely to be fine however, submerging the key fob in pool or ocean water is likely to cause damage.

If the key fob is exposed to water and ceases to function the device will need to be reprogrammed. This can be accomplished by following instructions in the owner's manual, or by taking it to an auto locksmith professional or a Fiat dealer.

Another reason why a fob can stop working is that it's not in range from your car. Key fobs typically have a range of about 30 feet and if they're far away from your car, they won't recognize them. The first step is to move closer to your car. If you're not able to get it working, the key fob battery might require replacement. You can find battery replacement instructions for a variety of automobiles on YouTube or in the owner's manual. If your key fob is looking damaged and scratched, it's time to replace it.

Faulty Receiver Module

Modern models of Fiat do not require the use of a key to start or open the car. The cars have a remote control that transmits an wireless message to the car in order to turn the engine on and off. If you have a broken key fob, a locksmith can replace it for you. Leave this job to the professionals and save time and money. They can also program fiat 500 key fob a brand new key for your Fiat.

You will need to provide the locksmith with a few details over the phone when you want a spare Fiat key. For instance, you will have to provide the year of manufacture of your vehicle and the model's name. This is essential as the locksmith will require this information to ensure that the new key works with the locks in place.

You must be aware that not all locksmiths are able make replacement keys for Fiat vehicles. You should choose one with a good reputation and experience in this area. This way, you can be certain that the key will work with your car and you won't be wasting money.

Keys that are not paired

If you have a key fob that isn't functioning, the main cause is the battery is dead. The key fob comes with metal clips which hold the battery in place, and completes the circuit. When these become worn or loose, it could cause contact issues and lose power. Replace the battery with a fresh one with the same size, voltage and specification, or use a spare.

It is essential to dry out the key Fiat 500 fob if it was submerged into liquid. Using isopropyl alcohol or electronic cleaner is a good method of doing this. It is also recommended that you remove the battery, clean the circuit board, and replace it before replacing.

Contacting locksmiths is the best choice if you can't find an alternative. A locksmith who is experienced can reprogram a Fiat transponder keys without having to see your original keys. This is a much less expensive and faster option than waiting for a genuine Fiat key to arrive from Italy. A professional locksmith will also have all the tools and equipment needed to complete a replacement in as little time as possible.