The Most Popular Peugeot Keys Is Gurus. Three Things

Peugeot 208 Key replacement key for peugeot 107

Peugeot 208 key replacement is best left to experienced auto locksmiths who have the right equipment and know-how. They can design and program keys more quickly and at a lower cost than a dealership.

A dead coin battery is most likely to blame the reason your key-fob stops locking or unlocking doors. There are other reasons that the key could be malfunctioning.

Dead Coin Battery

A dead battery can stop your Peugeot 208 from locking and unlocking, as well as preventing it from starting the engine. If this is the situation, you'll need utilize the backup starting method that's described in your vehicle's owner manual.

Another reason why your 208 may not start is because the spark plugs have been worn down. The spark plugs light the fuel to start the engine. However, they have a limited lifespan. If they aren't utilized enough and they fail, they'll eventually die.

There is a simple solution for this issue. The best thing to do is to determine the voltage of your car battery using a multimeter. If it's less than 11.5 volts then you must replace it. It is also important to clean the battery's contacts when it has corrosion. This can be accomplished by removing the rubber cover from the two battery terminals and then using a wirebrush to clean any damaged parts of the battery. Then, reconnect the cables for the positive and negative poles.

Water Damage

If your 208 won't turn on and the battery isn't flat, then you need to make sure whether the spark plugs are in good working order. It could be that they're overly dirty, which causes them not to spark. The spark plugs can be cleaned in an workshop.

Peugeot automobiles are equipped with a transponder compatible with the immobiliser. This ensures that only the right key is able to start the engine. If the chip inside the Peugeot key is damaged, it will not transmit the correct signal to the vehicle.

Water damage is a frequent reason for this issue. This is a common problem in more cold climates where the car has been exposed to snow or rain. If this is the case, get in touch with a reputable locksmith who has all of the tools and equipment needed to change the key's programming. They'll also have the latest technology and equipment required to make a peugeot 2008 replacement key smart key. The process should not take more than 15 minutes.

Contacts of the battery may be damaged.

Peugeot changed from the old carbon encased transponder chips and introduced a new type of chip that uses electronic components on a circuit board. This new technology works great when it's fresh, but as time passes, the circuit boards start to deteriorate and stop working correctly.

This can stop the immobiliser chip activating which means that your car won't start. If this is the case, it's best to contact a Peugeot specialist or locksmith.

A common issue occurs when the battery of the key fob starts to fail. This causes the blade of the key to stop feeding into your lock. A locksmith in your car can replace the battery and cut a new blade for you, it's typically a quick fix.

Faulty Receiver Module

It could be that the receiver module has a problem in the event that your Peugeot key fob doesn't work after being dropped on the floor, or exposed to a stormy rainstorm, or accidentally washed. The receiver is responsible for sending radio frequency signals to the on-board computer that controls the central locking system in your Peugeot vehicle.

Rubber seals on the key fob prevent water from reaching its electronic chip. The chip can be damaged by water in the event that it is exposed the water for an extended period of time. Submerging the key fob in sea water at the beach or throwing it into the water can be particularly damaging due to the high salt content.

If your Peugeot spare key fob isn't working, you'll need to have the module replaced. This is only performed by a professional auto locksmith or Peugeot specialist. Unlike other cars, Peugeot keys are protected by an exclusive immobilizer system that requires the right coding in order to start the engine. It is for this reason that you should only trust an authorized peugeot 308 key fob replacement locksmith to create and program an alternative.

Computers with faulty on-board computers

The on-board computer in your Peugeot is responsible for a number of the systems within your car, ranging from power windows to airbags. If something goes wrong with these systems, they will usually display a code indicating the problem. This code is stored in the system and will stay there until the issue is solved. Often, this will involve replacing the computer on board.

The most common reason for the warning light for airbags to come on is corroded or loose connections in the sensor. This can be caused by wear and tear, aging or exposure to moisture and salt. It is crucial to get this issue addressed as soon as you can, as an airbag that is not functioning properly could be risky in the event of an accident.

If your Peugeot is showing a card that is not being detected error, then the battery in the key fob may be dead or weak. This will stop the key fob from sending a signal to disarm the immobilizer on your vehicle. Try this by pressing the unlock key on the fob's key and then trying to start your car. If this doesn't work it is likely that the battery needs to be replaced.